Steering clutch re-shiming (part 3). SHERP Pro ATV parts and Service

okay so we added our shims that we needed we put it all back together you have to make sure that you tighten up the nut that's inside of here it's on the inside you have to make sure that that's tight every time you check your adjustments so then now that we have it tight we made another mark here here's our center center line obviously now we have our new line i'm going to go ahead and measure that now and it's right at 12 and a half millimeters which is more than enough it can be 12 plus or minus 2. for new clutch packs you typically want closer to 14 than you would underneath to less than 12 so just keep that in mind when you do and that's about it Relevant link: https://canadaoffroadcenter.com/products/customized-steering-friction-mechanism-with-oil-bath-and-handbrake https://canadaoffroadcenter.com/products/clutch-assembly_03-0042 https://canadaoffroadcenter.com/products/friction-driving-disk_03-0060 https://canadaoffroadcenter.com/products/friction-driven-disk_03-0062