Description:
In this video is part 2 of how to clean the steering unit
1) you need to start the Sherp pro and put the brake on in first gear and spray the brake cleaner for 10 second .
2) now release the brake and spray for another 10 seconds brake cleaner . its good to have rags under the steering unit to catch the brake fluid .
3) an repeat on the other side step 1,2 again .
4) to put the chain on move the disc so the chain can line back on use you pry bar if needed and put the pin back in .
on the other side remove the clutch spring and put the pry bar on the clutch to move it back to move the disc to line up the chain and put the pin back in .